Products

Fuel Fireplace

"If you do have a chimney, please clean it and conduct integrity test to ensure its structural integrity." "Depending on the width of your chimney box and flue, you can knock an opening to make it wider." "But remember, if it is high, you may need to install an exhaust fan or collector to help remove combustion fumes from the room.". "You may also need a fresh outlet to let air in." These suggestions apply to your decision to go for real fire or open air gas options. If you do not have a chimney, it is better to choose the glass side balanced flue gas fire. This is a completely sealed device, which can be installed with a flue pipe (the pipe leading to the wall outlet). "You can also make a fake chimney cabinet."

Send Inquiry

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

For the stove surface itself, natural stones such as limestone or slate are the most suitable materials, because they are impermeable and can flow into the fireplace all the time. Materials such as concrete or marble will crack if placed directly under the heat source, but if you like this appearance, they can be combined with more stable stones. Then, a gas burner of ceramic logs can be installed on the top to simulate a typical fire.

If you do not have a natural gas supply, bottled gases such as liquefied petroleum gas (liquid propane gas) are also an option. Both gas and balanced flue fires can be operated by remote control. Solid wood fuel only. All standard fireplaces are painted with a high temperature factory matte black finish. All dimensions are in inches. Precise measurements may vary ± ¼ ". Customized integrated grate assembly. Customized removable spark protection screen. Adjustable flue ventilation damper control. The height of the chimney vent must extend at least 3 feet above the roof outlet, at least 2 feet. Above any obstacle within 10 feet. Radius. Minimum 15 feet. More ventilation is required from the fireplace opening to the top of the chimney. Optional decorative chimney y Additional cost cover, combustible removal 1. Combustible and/or fireplace open side At least 36 inches from the wall and at least 18 inches from the enclosed side. If a rotating device is used, it is 36 inches on each side. 2. 2 inches around chimney system and 18 inches around flue. Non combustible floor material at least 18 inches from the fireplace opening, and approximately 8 inches from the closed side of the other fireplace, including the following. 4. Place the lower lip of the fireplace opening at least 22 inches from the floor.