Products

Big Timber Heater

Biomass pellet fuel is "do not compete with grain land", "do not compete with people to eat" the second generation of biofuel. The waste can be reused to the maximum extent and made into granular fuel, which can replace non-renewable energy such as coal and oil, and is widely used in various industrial boilers. It burns about 4,700 calories per ton, comparable to standard coal. All kinds of emission indicators are lower than the national (GB13271-2001) "boiler air pollutant emission standard" provisions, is to replace electricity, fuel oil, gas, coal, the best product. Biomass particles have low operation cost, which can save 40%--50% operation cost compared with fuel, gas and electric heating. It is a kind of energy efficient and environmental friendly heat energy.

Send Inquiry

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

1. Straw fuel (i.e., biofuel) is made of solid wastes such as corn stalks, wheatgrass, straw, peanut shells, corn cobs, cotton stalks, soybean stalks, weeds, branches, leaves, sawdust and bark as raw materials. After grinding, pressurizing, densifying and shaping, it becomes small rod-like solid granular fuel. Pellet fuel is made by extruding wood chips, straw and other raw materials with roller and ring die under normal temperature. The density of the raw material is generally about 130kg/m3, and the particle density after forming is more than 1100kg/m3. It is very convenient to transport and store. At the same time, its combustion performance is greatly improved. 2. The process flow is raw material collection → raw material grinding → mechanical granulation → bagging and selling. According to the different harvest time of crops, raw materials should be stored in large quantities in time and then crushed and formed. Pay attention not to bag immediately when forming, because of the principle of heat expansion and cold contraction after cooling for 40 minutes, then bag transportation. 3, characteristics of straw fuel molding granular fuel, heavy, small size, combustion resistance, easy storage and transportation. The volume of the molding is 1/30~40 of the volume of the raw material, the proportion is 10~15 times of the raw material (density: 0.8-1.4), the calorific value can reach 3400~6000 CAL, is a high volatile phenol solid fuel. 4, The use of straw fuel granule fuel is a new type of biological energy, it can replace wood, coal, fuel oil, liquefied gas, etc., widely used in heating, domestic stove, hot water boiler, industrial boiler, biomass power plant, etc.